Regenerative Reversing DC Drives.
DC Speed Controls in NEMA 1 for: 5 to 7.5HP -180V or 2 to 3HP-120V DC Motors with P.M. or Wound field, NEMA 1
Regenerative Reversing DC Drives, Open Chassis.
Regenerative Speed Controls for: 0.5 ~ 7.5 HP-180V or 0.5 ~ 3 HP-120V DC Motors with P.M. & Wound Field, Open Chassis. (Custom Drives Available, Contact Us)
DC Drives for: 20 to 40HP
DC Speed Controls for: 15 to 20HP - 240V DC or 15 to 40HP - 500V DC Motors with Wound Fields, Open Chassis. (Custom Drives Available, Contact us)
Reversing DC Drives for: 0.1 to 7.5HP
DC Drives for: 0.25 to 7.5 HP-90 & 180VDC Motors with P.M. or Wound field. Open Chassis and NEMA 1, See our catalog.
Anti-Plug (Zero Movement) Board, Mod. AAPB
The AAPB model boards are designed for reversing DC drives, these boards ensure the motor reaches a complete standstill before reversing direction. This is critical for automated systems (by a PLC) and unattended machinery where precise, unsupervised control is required
Reversing DC Drives NEMA 1
Reversible DC Speed Controls for: 0.5~3HP-180V or 0.25~1.5HP-90V DC Motors with P.M or Wound field.
Signal Isolation Boards
The AIB-U Signal Isolation Boards provide electrical isolation and signal conversion for PLCs and CNCs or any other electronic control sources, allowing safe and reliable speed control of DC or AC drives protecting your electronic control sources without interference to other equipment.
Reversing DC Drives - CAM Series.
For 0.25 to 3HP - 90V/180V DC Motors with PM or Wound field, NEMA1
DC Speed Controls -Open Chassis- 1/10 ~ 0.5 (1) HP
For 1/10 HP to 1HP DC Motors 90V or 180VDC Motors. Power Input: 115 or 230V AC Single Phase.
Speed & Torque Controls -Open Chassis for 5HP-180VDC
DC Torque Drives for: 1 to 5 HP-180VDC Motors. Power Input 208~240VAC, Single Phase.
Speed Controls for: 1~3HP 90/180V NON-Regenerative
For: 1 to 3HP 90 or 180VDC Motors, Power Input: 115 or 230 VAC, 50/60 Hz. Single Phase.
Reversing DC Drives for 5HP-180VDC and 3HP-100VDC Motors, Open Chassis.
Reversing DC Drives, for 5 HP to 7.5HP-180V & 2 to 3HP-100V DC Motors.
Custom Drives available, Contact us.
240 & 500V DC Speed Controls
DC Speed Controls for: 5 to 20HP-240V or 5 to 40HP-500V DC Motors with Shunt Wound Field. (Custom Drives available, Contact us)