AUcontrols, Made in USA
Static Phase Converter Mod. ASPC-5HD. (3 to 5HP)
RUN 3-Phase, Motors with 208-240 VAC Single Phase Power,AT 2/3 OF MOTOR'S RATED HP,
DESIGNED TO RUN 3-Phase Motors ONLY!
FOR LIGHT to MEDIUM LOADS
Static Phase Converters will ONLY GIVE 60% OF MOTOR's rated HP.!
HP Range: Min: 3 Max: 5.
Power Supply: Single Phase 208 - 240 VAC 50/60 Hz.
Single Phase FLA: 15 Amps
Dimensions: 8" X 8" X 4".
1 Year Warranty.
IMPORTANT:
> Do not buy a bigger Static Phase Converter than your Motor's HP thinking that you will get more power . It will NOT run, nor get a smaller Converter because it will not work either! Static Phase Converters DO NOT generate the 3rd Phase!
>Your Motor HP has to be between the Static Phase Converter HP to run properly.
> If you are using a Motor Starter make sure the Motor Starter's Contactor's coil is fed from L1 & L2 (230VAC) otherwise it will not start.
> You Can Run: Lathes not fitted with clutch, Milling & Drilling machines, Saws, etc.
> If you are using a Motor Starter make sure the Motor Starter's Contactor's coil is fed from L1 & L2 (230VAC) otherwise it will not start.
> You Can Run: Lathes not fitted with clutch, Milling & Drilling machines, Saws, etc.
> For Air Compressors, blowers, water pumps and hyraulic pumps with pulley, the Motor's pulley diameter MUST BE REDUCED 1/3 or a 50% larger Motor can be fitted.
You can use your motor with heavy starting cyles, frequent starting, instant reversing, etc.
Keep in mind that Static Phase Converters will ONLY GIVE 60% OF MOTOR's rated HP.